GMC |
An excellent all around epoxy
maintenance paint. It is used primarely on
small projects where resistance to
environmental pollutants, spills or leaks are
required. Typical applications are on exterior
pump casings, fans, valves and vessels |
EAC |
A brushable and versatile
maintenance material which has excellent
resistance to both acids and caustics as well
as having excellent abrasion resistance. It is
primarely used to resurface any component
requiring both abrasion and chemical resistance
such as tanks, heat exchangers valve and pump
internals |
EAC-FE |
A brushable, more resilient
version of EAC used to enhence fluid flow,
resist cavitation or anywhere requiring more
impact resistance in a thin film product |
EXP |
A higher chemical and temperature
resistant version of the EAC used in the most
aggressive of chemical environments |
SAR |
A versatile, easy to use
rebuilding putty with excellent abrasion and
chemical resistance. This product is
heavily filled with aluminium oxide and can be
built to a thickness of 25 mm or typical
applications include rebuilding of pump
casings, slurry tanks, weld seams or anywhere
requiring the restoration of metal
components |
HAR |
A
more abrasion resistant putty than SAR which is
primarely used in areas requiring more
resistance to fine slurries either in liquid or
powder form. Common applications are in coal
mills, chutes, ash hoppers or deflector plates
in FDG systems |
EXP-Thixset |
A
more chemical and higher temperature resistant
version of either SAR or HAR used primarely in
areas operating at higher temperatures and
requiring better chemical resistance.
Applications include acid tank repair, boiler
skirts or refinary evaporator
vessels |
UltraBuild |
A
rugged durable, trowel grade product filled
with ceramic beads and other abrasion resistant
fillers. It is used primarely in areas where
abrasion resistance to both small and coarse
slurries are required over large areas. It is
typically used in the mining industry on
chutes, hoppers, classifiers or mills. It
can be built up to 5 cm in thickness or more in
a single coat |
MG-F |
A stainless steel filled putty
which is engineered for use where final
precision machining is required. Typical
applications include shaft repairs, pump parts,
bearing housings, or anywhere requiring final
machining to close tolerances |
DuroCaulk |
An elastomeric epoxy urethane
caulk which combines the flexibility of a
urethane with the chemical resistance and
adhesion of an epoxy |
DuroStik |
An extremely fast curing putty
material, packaged in a single tube for easy
mixing and use. Ideal for storing in tool boxes
to make quick repairs or to stop leaks in
steel, aluminium, fiberglass or concrete |
EAC-UW |
An
underwater version of the EAC used for
resurfacing or painting underwater vessels,
pilings or other similar items |
SAR-UW |
An underwater curing version of
SAR used for rebuilding areas underwater or
where the component needs to be put back into
underwater service before full cure. Applicable
to both fresh and saltwater service |